Feasibility study on formulation of cutting fluid from waste palm oil
DOI:
https://doi.org/10.25081/rrst.2023.15.8438Keywords:
Waste palm oil, Cutting fluid, Performance testAbstract
From an industrial, environmental, and scientific standpoint, the creation of renewable and sustainable products to replace fossil fuels is an important concern in this decade. Due to the growing use of different lubricant types, the majority of which are mineral-based, there is an unavoidable flow of mineral-based lubricants into the environment. Another issue is using cooking oil that pollutes the environment when discarded. Both of these issues can be resolved by creating bio-based lubricants from discarded cooking oil. This article discusses formulating a green cutting fluid made from used cooking oil. This enables the use of waste oil as a cutting fluid while retaining its tribological and environmental characteristics. In order to compete in the market, biodegradable cutting fluid might gain from decreased costs for used natural oils. The many components and trends that make up this topic are briefly covered in this article, along with waste cooking oils’ potential application as a bio-based lubricant.
Downloads
References
Al-Widyan, M. I., Al-Shyoukh, A. O. (2002). Experimental evaluation of the transesterification of waste palm oil into biodiesel. Bioresource Technology, 85(3), 253-256. https://doi.org/10.1016/S0960-8524(02)00135-9
Belluco, W., & De Chiffre, L. (2004). Performance evaluation of vegetable-based oils in drilling austenitic stainless steel. Journal of Materials Processing Technology, 148(2), 171-176. https://doi.org/10.1016/S0924-0136(03)00679-4
Diniz, A. E., & Micaroni, R. (2007). Influence of the direction and flow rate of the cutting fluid on tool life in turning process of AISI 1045 steel. International Journal of Machine Tools and Manufacture, 47(2), 247-254. https://doi.org/10.1016/j.ijmachtools.2006.04.003
Hosseinzadeh-Bandbafha, H., Nizami, A.-S., Kalogirou, S. A., Gupta, V. K., Park, Y.-K., Fallahi, A., Sulaimam, A., Ranjbari, M., Rahnama, H., Aghbashlo, M., Peng, W., & Tabatabaei, M. (2022). Environmental life cycle assessment of biodiesel production from waste cooking oil: A systematic review. Renewable and Sustainable Energy Reviews, 161, 112411. https://doi.org/10.1016/j.rser.2022.112411
Lawal, S. A., Choudhury, I. A., & Nukman, Y. (2014). Evaluation of vegetable and mineral oil-in-water emulsion cutting fluids in turning AISI 4340 steel with coated carbide tools. Journal of Cleaner Production, 66, 610-618. https://doi.org/10.1016/j.jclepro.2013.11.066
Lodhi, A. P. S., Kumar, D., Kaur, T., & Singh, N. (2021). Development of lubricious, non-toxic, and corrosion-resistant metalworking fluid: A possible replacement for mineral oil-based fluids. Journal of Cleaner Production, 323, 129173. https://doi.org/10.1016/j.jclepro.2021.129173
Madanchi, N., Leiden, A., Winter, M., Asbach, C., Lindermann, J., Herrmann, C., & Thiede, S. (2018). The International Journal of Advanced Manufacturing Technology, 101, 773-783. https://doi.org/10.1007/s00170-018-2934-5
Sankaranarayanan, R., Hynes, N. R. J., Kumar, J. S., & Krolczyk, G. M. (2021). A comprehensive review on research developments of vegetable-oil based cutting fluids for sustainable machining challenges. Journal of Manufacturing Processes, 67, 286-313. https://doi.org/10.1016/j.jmapro.2021.05.002
Shashidhara, Y. M., & Jayaram, S. R. (2010). Vegetable oils as a potential cutting fluid—An evolution. Tribology International, 43(5-6), 1073-1081. https://doi.org/10.1016/j.triboint.2009.12.065
Yan, P., Rong, Y., & Wang, G. (2015). The effect of cutting fluids applied in metal cutting process. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 230(1), 19-37. https://doi.org/10.1177/0954405415590993
Published
How to Cite
Issue
Section
Copyright (c) 2023 Recent Research in Science and Technology
This work is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported License.
.